Maintain Your Unit With Holmes Humidifier Parts
Maintain Your Unit With Holmes Humidifier Parts
It is important to keep up maintenance on your humidifier to assure it is most efficient use and not harmful to your family. Clogged humidifiers can send damaging particles into the air causing lung infections and serious health conditions.
Holmes humidifier parts are one way to upkeep your unit, some of their products may be used on warm mist or cool mist humidifiers.
An important problem to avoid in cool mist humidifiers is the growth of bacteria in the tank. The bacteria can cause severe health problems. One solution is using a Holmes humidifier part, Holmes' Bacteriostat Solution. This liquid solution controls bacteria and algae growth in cool mist humidifier's tanks and wick filters. It should be used only with evaporative models.
In steam humidifiers you may find a lot of lime and scale build up. To avoid these build-ups try using Holmes humidifier part, Holmes' Water Treatment Solution. This product extends the life of your humidifier and warm mist heat systems. It makes cleaning easier because it reduces mineral build up. When you use this product you are less likely to have lime and scale build up inside your tank or heating element.
Another Holmes humidifier part that can be used in any warm mist or cool mist humidifier is the Cleanse Clean Solution. This solution is a basic cleaner to remove all mineral deposits from the tank. It does not however fight bacterial growth.
Cleansers and solutions are not the only maintenance necessary for humidifiers. Make sure you change or clean wicks on warm mist humidifiers. If these become clogged and dirty, that is when you have a potential health risk. If the wick and filter are dirty they are not filtering out the harmful materials in the air. Holmes humidifier parts offer various sizes and models for humidifiers of all kinds.
Another important Holmes humidifier part for your home is a hygrometer. Hygrometers measure the amount of moisture in the air. Too much or too little moisture will cause problems like dry skin, lingering viruses in the air and home damage. These small devices tell you what level, in percentage, of moisture is in the air. Hygrometers vary from inexpensive to moderately expensive, depending on if they are digital or not.
Holmes humidifier parts are available at department and hardware stores. Be sure to regularly check all these aspects to keep your unit running longer than guaranteed.
She is a marketing executive for global consumer brands, media, and high tech businesses. She loves writing about shopping, product reviews, fashion, travel, green innovation, arts & entertainment. She spots consumer trends, explores and assembles ideas, and provides creative solutions to business challenges. Currently, she writes for IMshopping.com
Article from articlesbase.com
Find More Steam Humidifier Articles
Categories: Steam Vaporizers Tags: Holmes, Humidifier, Maintain, Parts, Unit
Power Steam Humidifier With Automatic Steam Distribution Unit
Power Steam Humidifier With Automatic Steam Distribution Unit
The amount of humidity required in a home is dependent on acertain extent on the way it is constructed. A well inulated house with vapor barriers in walls,ceilings and slabs and properly fitting storm doors and windows may require only couple of galolons of additional moisture per day to maintain the proper relative humidity. A house of same size but loosely constructed may need five times as much moisture in the same period.
If you home winds up with too much humidity, it can incease the growth rate and spread of a wide variety of molds. It will also greatly accelerate the rotting process of many woods and other structural materials.
Humidity not only affects your home itself, but also a wide variety of contents. Low humidity is the main cause of static electricity in a home. Dry skin and dry carpets are great for creating the friction required to send sparks from you fingertips into anything you touch. With all the highly sensitive electronics equipement (from stereos and tv's to computers) in homes today, static electricity can be a major threat. It doesn't take much of a spark to harm that expensive piece of electronics.
A newly developed CB SDU steam-distubution unit for stand-alone electric steam humidifiers offers unprecedented precise humidity control in any size room or buildeng where ventilating ductwork is not present. The steam is discharged with a quiet fan blower (available in 3 sizes) directly into the area.
In addition, in order to prevent the accumulation of condensation in air ducts, Canada Blower has designed 2 basic configurations of steam distribution to provide the client with the most economical solution for any particular application.
Distribution manifold systems are to be used to prevent condensation in air ducts (available in 3 types of manifolds) .
1. Meag Steam; where absorption distances are very short.
2. SA-1; where absorption distances are short.
3. SA-2; where duct dimensions are restricted.
The SDU Steam Distribution Unit can be used with any type and size of CB electric steam humidifier. The self contained CB steam humidifiers produce mineral free, odourless, sterile steam without the replacement cost associated with electrode cylinders manufactured by competitors.
CB Electric Humidifier has the following features:
• Capacities from 6-180lb/hr (3-80 kg/hr) of steam
• On/Off or fully modulating with solid state relays
• Remote interface capability
• Precise mass measuring water sensor.
• Permanent stainless steel chamber with self cleaning heating elements
• Simplicity of operation and service
• Corrosion and scratch resistant aluminium housing with powder paint finish
• Wall mounted installation
The CB humidifier is easy to install and provides a simple and reliable operation with the user friendly control package. Steam is produced in a permanent stainless steel chamber which is easily removed and re-installed for rapid servicing. No plastic cylinders to replace, making it more economical to operate and environmentally friendly than the electrode humidifier.
• No expensive plastic cylinders to buy
• Environmentally friendly - no plastic cylinders to throw away
• No more blocked drain solenoid valves
• Drain water tempered to below 14
For additional information please visit http://canadianblower.com/hvac/index.html.
Oleg Tchetchel
Industrial process engineer
Canada Blower
http://canadianblower.com/index.html
http://canadianblower.com/ahu/index.html
Chemical Physics Engineer
Article from articlesbase.com
Categories: Steam Vaporizers Tags: Automatic, Distribution, Humidifier, Power, Steam, Unit
Electric Steam Humidifier With Automatic Steam Distribution Unit
Electric Steam Humidifier With Automatic Steam Distribution Unit
The amount of humidity required in a home is dependent on acertain extent on the way it is constructed. A well inulated house with vapor barriers in walls, ceilings and slabs and properly fitting storm doors and windows may require only couple of galolons of additional moisture per day to maintain the proper relative humidity. A house of same size but loosely constructed may need five times as much moisture in the same period.
If you home winds up with too much humidity, it can incease the growth rate and spread of a wide variety of molds. It will also greatly accelerate the rotting process of many woods and other structural materials.
Humidity not only affects your home itself, but also a wide variety of contents. Low humidity is the main cause of static electricity in a home. Dry skin and dry carpets are great for creating the friction required to send sparks from you fingertips into anything you touch. With all the highly sensitive electronics equipement (from stereos and tv's to computers) in homes today, static electricity can be a major threat. It doesn't take much of a spark to harm that expensive piece of electronics.
A newly developed Neptronic SDU steam-distubution unit for stand-alone electric steam humidifiers offers unprecedented precise humidity control in any size room or buildeng where ventilating ductwork is not present. The steam is discharged with a quiet fan blower (available in 3 sizes) directly into the area.
In addition, in order to prevent the accumulation of condensation in air ducts, NEP has designed 2 basic configurations of steam distribution to provide the client with the most economical solution for any particular application.
Distribution manifold systems are to be used to prevent condensation in air ducts (available in 3 types of manifolds) .
1. "MULTI-STEAM"; where absorption distances are very short.
2. "S.A.M."; where absorption distances are short.
3. "S.A.M.E."; where duct dimensions are restricted.
The SDU Steam Distribution Unit can be used with either SK-300 or SKR electric steam humidifier. The self contained SK300 steam humidifiers produce mineral free, odourless, sterile steam without the replacement cost associated with electrode cylinders manufactured by competitors.
SK300 Electric Humidifier has the following features:
· Capacities from 6-180lb/hr (2.7-82kg/hr) of steam
· On/Off or fully modulating with solid state relays
· BACnet interface capability
· AFEC system, mass measuring water sensor.
· Permanent stainless steel chamber with self cleaning heating elements
· Simplicity of operation and service
· Corrosion and scratch resistant aluminium housing with powder paint finish
• Wall mounted installation
The SKR humidifier is easy to install and provides a simple and reliable operation with the user friendly control package. Steam is produced in a permanent stainless steel chamber which is easily removed and re-installed for rapid servicing. No plastic cylinders to replace, making it more economical to operate and environmentally friendly than the electrode humidifier.
· No expensive plastic cylinders to buy
· Environmentally friendly - no plastic cylinders to throw away
· No more blocked drain solenoid valves
• Drain water tempered to below 14
For additional information please visit http://northernindustrialsupplycompany.com/products/nep.html.
Oleg Chetchel
Application Engineer
nisco@globalserve.net
NISCO
http://northernindustrialsupplycompany.com/burlington/index.html
http://northernindustrialsupplycompany.com/company.html
Oleg Chetchel
Application Engineer
nisco@globalserve.net
NISCO
http://northernindustrialsupplycompany.com/burlington/index.html
http://northernindustrialsupplycompany.com/company.html
Article from articlesbase.com
Categories: Steam Vaporizers Tags: Automatic, Distribution, Electric, Humidifier, Steam, Unit
Steam Humidifier With Automatic Steam Distribution Unit
Steam Humidifier With Automatic Steam Distribution Unit
The amount of humidity required in a home is dependent on acertain extent on the way it is constructed. A well insulated house with vapor barriers in walls, ceilings and slabs and properly fitting storm doors and windows may require only couple of galolons of additional moisture per day to maintain the proper relative humidity. A house of same size but loosely constructed may need five times as much moisture in the same period.
If your home winds up with too much humidity, it can incease the growth rate and spread of a wide variety of molds. It will also greatly accelerate the rotting process of many woods and other structural materials.
Humidity not only affects your home itself, but also a wide variety of contents. Low humidity is the main cause of static electricity in a home. Dry skin and dry carpets are great for creating the friction required to send sparks from you fingertips into anything you touch. With all the highly sensitive electronics equipement (from stereos and tv's to computers) in homes today, static electricity can be a major threat. It doesn't take much of a spark to harm that expensive piece of electronics.
A newly developed Canada Blower steam-distubution unit for stand-alone electric steam humidifiers offers unprecedented precise humidity control in any size room or buildeng where ventilating ductwork is not present. The steam is discharged with a quiet fan blower (available in 3 sizes) directly into the area.
In addition, in order to prevent the accumulation of condensation in air ducts, Canada Blower has designed 2 basic configurations of steam distribution to provide the client with the most economical solution for any particular application.
Distribution manifold systems are to be used to prevent condensation in air ducts (available in 3 types of manifolds) .
1. Meag Steam; where absorption distances are very short.
2. SA-1; where absorption distances are short.
3. SA-2; where duct dimensions are restricted.
The SDU Steam Distribution Unit can be used with and type and size of CB electric steam humidifier. The self contained Canada Blower steam humidifiers produce mineral free, odourless, sterile steam without the replacement cost associated with electrode cylinders manufactured by competitors.
CB Electric Humidifier has the following features:
• Capacities from 6-180lb/hr (3-80 kg/hr) of steam
• On/Off or fully modulating with solid state relays
• Remote interface capability
• Precise mass measuring water sensor.
• Permanent stainless steel chamber with self cleaning heating elements
• Simplicity of operation and service
• Corrosion and scratch resistant aluminium housing with powder paint finish
• Wall mounted installation
The CB humidifier is easy to install and provides a simple and reliable operation with the user friendly control package. Steam is produced in a permanent stainless steel chamber which is easily removed and re-installed for rapid servicing. No plastic cylinders to replace, making it more economical to operate and environmentally friendly than the electrode humidifier.
• No expensive plastic cylinders to buy
• Environmentally friendly - no plastic cylinders to throw away
• No more blocked drain solenoid valves
• Drain water tempered to below 14
For additional information please visit http://nisco.net.
Oleg Tchetchel
Canadian air systems designer
NISCO
http://www.nisco.net/humidifier.html
http://www.nisco.net/index.html
Chemical Physics Engineer
Article from articlesbase.com
Categories: Steam Vaporizers Tags: Automatic, Distribution, Humidifier, Steam, Unit
Electric Steam Humidifier With Steam Distribution Unit
Electric Steam Humidifier With Steam Distribution Unit
The amount of humidity required in a home depends to a certain extent on the way it is constructed. A well insulated house with vapor barriers in walls, ceilings and slabs and properly fitting storm doors and windows may require only couple of galolons of additional moisture per day to maintain the proper relative humidity. A house of same size but loosely constructed may need five times as much moisture in the same period.
If your home winds up with too much humidity, it can incease the growth rate and spread of a wide variety of molds. It will also greatly accelerate the rotting process of many woods and other structural materials.
Humidity not only affects your home itself, but also a wide variety of contents. Low humidity is the main cause of static electricity in a home. Dry skin and dry carpets are great for creating the friction required to send sparks from you fingertips into anything you touch. With all the highly sensitive electronics equipement (from stereos and tv's to computers) in homes today, static electricity can be a major threat. It doesn't take much of a spark to harm that expensive piece of electronics.
A newly developed NEP steam-distubution unit for stand-alone electric steam humidifiers offers unprecedented precise humidity control in any size room or buildeng where ventilating ductwork is not present. The steam is discharged with a quiet fan blower (available in 3 sizes) directly into the area.
In addition, in order to prevent the accumulation of condensation in air ducts, NEP has designed 2 basic configurations of steam distribution to provide the client with the most economical solution for any particular application.
Distribution manifold systems are to be used to prevent condensation in air ducts (available in 3 types of manifolds) .
1. “MULTI-STEAM”; where absorption distances are very short.
2. “S.A.M.”; where absorption distances are short.
3. “S.A.M.E.”; where duct dimensions are restricted.
The SDU Steam Distribution Unit can be used with either SK-300 or SKR electric steam humidifier. The self contained SK300 steam humidifiers produce mineral free, odourless, sterile steam without the replacement cost associated with electrode cylinders manufactured by competitors.
SK-300 Electric Humidifier has the following features:
• Capacities from 6-180lb/hr (2.7-82kg/hr) of steam
• On/Off or fully modulating with solid state relays
• BACnet interface capability
• AFEC system, mass measuring water sensor.
• Permanent stainless steel chamber with self cleaning heating elements
• Simplicity of operation and service
• Corrosion and scratch resistant aluminium housing with powder paint finish
• Wall mounted installation
The SKR humidifier is easy to install and provides a simple and reliable operation with the user friendly control package. Steam is produced in a permanent stainless steel chamber which is easily removed and re-installed for rapid servicing. No plastic cylinders to replace, making it more economical to operate and environmentally friendly than the electrode humidifier.
• No expensive plastic cylinders to buy
• Environmentally friendly - no plastic cylinders to throw away
• No more blocked drain solenoid valves
• Drain water tempered to below 14 degrees
For additional information please visit http://northernindustrialsupplycompany.com.
Oleg Chetchel, Ph.D
Humidification Engineer
NISCO
http://www.northernindustrialsupplycompany.com
http://northernindustrialsupplycompany.com/products/humidifiers.html
Oleg Chetchel
Ventilation Equipment Designer
Tenderall Fan Co.
http://tenderall.com
Article from articlesbase.com
Categories: Steam Vaporizers Tags: Distribution, Electric, Humidifier, Steam, Unit